Single Inlet Abrasion Proof Lime Kiln Heavy Duty Centrifugal Fans
Detail introduction
The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation.
It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases.
The temperature of the medium is generally not more than 80°C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3.
Feature Of Centrifugal Fan
1.The fan can output higher gas pressure, and can provide more gas flow at the same time, low noise.
2. In the case of using the common base, the installation is very simple and basically does not require the support of professional technicians.
3. The motor shaft is elastically connected with the drive shaft. It is not necessary to tighten the belt or replace the belt frequently, and the maintenance workload is small.
Technical data
| series | model | Rotation Speed
(r/min) | Total Pressure
(Pa) | Air Capacity
(m³/h) | Power
(kW) |
| 9-10 | 8D | 1450～2900 | 3231～15034 | 3297～14287 | 7.5～110 |
| 9D | 1450 | 4101～4597 | 4695～10717 | 15～22 |
| 10D | 1450 | 4958～5840 | 6440～15455 | 30～37 |
| 11.2D | 960～1450 | 2705～7364 | 5990～21713 | 15～75 |
| 12.5D | 960～1450 | 3975～9229 | 8327～30186 | 22～110 |
| 14D | 960～1450 | 4249～11668 | 11699～42409 | 37～220 |
| 16D | 960～1450 | 5575～15425 | 17463～63305 | 75～315 |
Product Advantages
The 9-10 series high-pressure centrifugal fan is the latest developed high-efficiency and energy-saving product, whose performance fully meets the aerodynamic performance of general fan 9-08 series, and has the characteristics of high efficiency, low noise, flat performance curve, large flow regulation range and wide efficient area.
Product Tags:
|
|
Single Inlet Abrasion Proof Lime Kiln Heavy Duty Centrifugal Fans Images
|
